|
New
Product Bulletin – Blind Shelf Supports*
November,
2005
|
|
A pair
of these blind shelf supports will invisibly hold a 1" or thicker shelf.
Each mounting plate is anchored to the wall studs with two flat-head screws,
and the projecting 5" long hex posts slip into 7/16" holes drilled
in the back side of the shelf. Even if the holes end up slightly undersize,
the corners of the hex post will cut their way in.
|
|
|
|
The design ensures that the
alloy steel coupling screws remain tensioned between the posts and inserts in
the plates, yielding a respectable capacity of 100 lb for a 4" deep shelf
and up to 50 lb at 8" deep.
|
|
|
|
|
Additional supports are sold
singly for increasing load capacity on shelves long enough to span more than
two studs; each extra support adds 50 lb more capacity at 4" deep, and
25 lb more at 8" deep*. Simple instructions included make installation a
snap.
|
|
Contact our sales department at
800-361-0983 or sales@TriparInc.com.
* Patent Pending
|
|
|
|
|
