We are pleased to introduce a new family of items for MR11 lamps, ideal for small recessed requirements such as display or cabinet lighting.

    The pivoting gimbal (1158S-1) is riveted within neck of the low profile 3” diameter trim (1296). The same rivets secure spring retainers (0039) to the outside. These retainers enable the mousetrap style springs (PP174) to hold the gimbal/trim assembly as well as the compact 2-1/2” diameter x 2-3/4” tall housing (0687ZN-10) tight to the ceiling.

     Relamping is as simple as pulling the trim down and pivoting the lamp out from the gimbals’ integral curved spring.

    Wire access to the housings is accomplished with a strain relief bushing snapped into the 7/16” top hole, allowing both power entry, as well as series interconnection.

    For new construction installations, two 6-1/2” square plaster frames are available; 1252-6 contains side bar hanger slots, and R2-PF-11 contains face bar hanger pockets. Both are compatible with bar hangers 1240.

    Contact our sales department at 1-800-361-0983 or sales@TriparInc.com.

    Another Innovation in Illumination™ from Tripar^®.