Newsletter May 2015 Lightfair 2015

Lightfair 2015

Tripar exhibited at Lightfair for the 12th straight year, located on our US Reps booth, Bill Brown Sales. Every year is always enjoyable seeing the new trends in the industry but undoubtedly it is the face to face time we have with both old and new customers that we look forward to the most.  We are already signed up for Lightfair 2016 in San Diego  and look forward to seeing everyone again.

New Product Bulletins

This month we introduced two new products; COMBAR and LED Assembly Kit.

COMBAR is our Commercial Bar Hanger Solution.  Using our standard parts, but in a new configuration,  commercial bar hanger performance is now available without the bulk and cost of traditional commercial bar hangers.LED Assembly Kit includes all the required components for a 6” downlight for OEMs to design and incorporate LED Modules.

LED Assembly Kit

COMBAR

Completed Video Library

After announcing our Video Library In February 2015, we have now completed all 7 videos and uploaded them onto our website.

1. Updated Corporate Video – Showing our renovated office and 200 Ton press
2. Metal Fabrication – CNC Laser and Press break enhance capabilities
3. Progressive Dies – What are they and why they are beneficial?
4. New Renovated Office – Designed for better communication and innovation
5. Drawing & Deep Drawing – What it is and why it is beneficial?
6. Cellular Manufacturing – Why lean manufacturing is beneficial?
7. In-house Toolroom – What we do and why it’s beneficial having it in-house?

Please click here to watch more Tripar’s videos on our YouTube channel.

LED Assembly Kit

New Product Bulletin – LED Downlight Assembly Kit

Tripar is pleased to offer components for a 6” downlight* for OEMs to design and incorporate LED Modules.

For new construction or remodel, non IC accessible or suspended ceilings. Luminaire, trim, and LED module can all be installed independently.

LED modules install into the Snap-on Cover Plate, the removal of which provides access to the 7” x 5 x 1-3/4” high integral junction box. Ideally suited to hold the OEMs Driver/Heat sink assembly, the Junction Box contains double knockouts for a combined total of ten knockouts; six ¾”, and four 1”, all designed for conduit connections suitable for through branch circuit wiring. Both the Cover Plate and Junction Box mounting holes are configurable to suit OEM specific requirements.

The collar contains a 1-3/8” tall flange and accepts three dual contact retaining springs to hold the Trim/Reflector securely to the finished ceiling, easily withdrawn for LED module replacement or painting. Compatible with ceiling thicknesses from ½” to 1-1/8”.

Either our 1254 Sliding Butterfly Brackets or our 1054 Caterpillar Brackets provide for 3” vertical adjustment, and permit suspension via our 1287 C-channel bar hangers. The Butterfly Bracket also permits additional means of suspension; conduit, furring strip, C-channel, etc.

Rigid design provides for secure mounting, constructed in your choice of 18 GA galvanized steel, or cold-rolled steel ready for powder painting.

Please note the Trim/Reflector is not included in the kit, only shown for illustration purposes

All parts made in progressive dies for the most competitive pricing. Contact one of our Sales Representatives at Sales@TriparInc.com .