3-D Cover, for 1232 & 1247 series Junction Boxes. Increases volume of mentioned boxes by approx. 50%, and, allows below ceiling access.
Galv & Aluminum (#1242AL-18B)
3-D Cover, for 1232 & 1247 series Junction Boxes. Increases volume of mentioned boxes by approx. 50%, and, allows below ceiling access.
Galv & Aluminum (#1242AL-18B)
3-D Cover, for 1232 & 1247 series Junction Boxes. Increases volume of mentioned boxes by approx. 50%, and, allows below ceiling access.
Galv & Aluminum (#1242AL-25B)
3-D Cover, for 1232 & 1247 series Junction Boxes. Increases volume of mentioned boxes by approx. 50%, and, allows below ceiling access.
Galv & Aluminum (#1242AL-37B)
Airtight 3D cover, galv., snap-on. Internal junction box cover for use with Chicago Plenum & Ultra Airtight I.C. Boxes. Used to mount driver directly to cover. Height: 3 3/8″
Airtight 3D cover, galv., snap-on. Internal junction box cover for use with Chicago Plenum & Ultra Airtight IC Boxes. Used to mount driver directly to cover. Height: 3 3/8″
Cover, galv., Screw-On. External junction box cover for use with Chicago Plenum & Ultra Airtight IC Boxes.
Cover, galv., Screw-On. External junction box cover for use with Chicago Plenum & Small Ultra Shallow IC Boxes.
This cover with the new hole location fits only the 1485 Series.
Cover, galv., Snap-On. Internal junction box cover for use with Chicago Plenum & Ultra Airtight IC Boxes, with Ø.50″ hole.
Cover, galv., Snap-On. Internal junction box cover for use with Chicago Plenum & Ultra Airtight
Airtight IC Boxes, no hole.
Cover, galv., Snap-On. Internal junction box cover for use with Mini Chicago Plenum & Ultra Airtight Mini IC Box.
Cover, galv., Screw-On. External junction box cover for use with Mini Chicago Plenum & Mini Ultra Airtight IC Boxes.
Range of over 50 cover varieties with differnet hole configurations. For 1232 & 1247 series Junction Boxes. Also to be used on 1241 & 1531 series plaster frames.
Cover, galv., Screw-On. External junction box cover for Large J-Box 70 for use with Chicago Plenum & Ultra Airtight IC Boxes 1481 Series.
Cover, galv., Snap-On. Internal junction box cover for Large J-Box 70 for use with Chicago Plenum & Ultra Airtight IC Boxes 1481 Series, with Ø.50″ hole.
Cover for #1532 Series, Large Junction Boxes 32. With an intentional slight curve which self-flattens upon installation to the J-Box.
Cover plate, for 1213 series Junction Boxes.
Cover plates, for 1221 & 1224 series Junction Boxes.
Small universal driver/junction box, W: 2-3/8″, H: 1-5/8″, L: variable from 8″ to 120″
Large universal driver/junction box, W: 4″ , H: 2″, L: variable from 8″ to 120″
Driver box and cover, 12-1/2″ x 3″ x 1-15/16″.
Driver box and cover 9″ x 1-3/4″ x 1″.
Driver box and cover, 11-1/2″ x 1-7/8″ x 1-3/4″.
Driver box and cover, 9-1/2″ x 1-7/8″ x 1-1/2″.
Driver box and cover, 4-1/2″ x 1-7/8″ x 1-1/2″.
Driver box and cover, 6″ x 1-7/8″ x 1-1/2″.
High/Low voltage divider for large universal driver/junction box, W: 4″, H: 1-15/16″
High/Low voltage divider for small universal driver/junction box, W: 2-5/16″, H: 1-15/16″
Junction Box extension.
Snaps onto 1232 & 1247 series Junction Boxes. Accepts all 1242 series covers.
Galv & Aluminum (#1232EAL)
Junction Box, retrofit, for MR16 for Ø3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, w/grd wire, for MR16 for Ø 3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, w/grd wire, for MR16 for Ø3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, w/grd wire, for MR16 for Ø3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, long for Ø3 3/8”, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, short for Ø3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, retrofit, long for Ø3 3/8″, Ø3 5/8″ & Ø4″ housings, galv.
Junction Box, w/ground wire & 9/16″ wire hole, Galv & Aluminum (#1232AL)
Junction Box, w/ground wire, no Ø9/16″ hole, Galv,
Use with 1242 series covers
Junction Box, w/ground wire, no Ø9/16″ hole” & “No Lock Tabs, Galv,
Use with 1242 series covers
Junction Box, w/ ground wire & Ø5/8″ wire hole.
Use with 1242 series covers
Junction Box, w/ground wire, No open holes, Galv
Use with 1242 series covers
Junction Box, w/ ground wire & Ø7/8″ wire hole.
Use with 1242 series covers
Junction Box, for Chicago Plenum and Ultra-Airtight I.C.Boxes w/ground wire and gaskets.
All knockouts pushed back to meet UL1598 knockout retention test
J-Box “32” is ready to be riveted directly onto the top side of most of our plaster frames.
J-Box “64” is ready to be riveted directly onto the top side of most of our plaster frames.
Large Junction Box, for Chicago Plenum and Ultra-Airtight I.C.Boxes 1481, 1482 and 1484 Series w/ground wire, gaskets and extension capability.
J-Box “Twist” 32 comes with our proven Z-Bracket riveted to one end, and a stop means at the other, allowing the box to be rotated in either direction.
J-Box “Twist 64” comes with our proven Z-Bracket riveted to one end, and a stop means at the other, allowing the box to be rotated in either direction.
Large J-Box “32” with our proven Z-Bracket, to elevate & offset the J-Box, also ready to be riveted directly to most of our plaster frames.
Large J-Box “64” with our proven Z-Bracket, to elevate & offset the J-Box, also ready to be riveted directly to most of our plaster frames.
Slim Airtight Junction Box, for Chicago Plenum and Ultra-Airtight Mini I.C. Box 1775-11(AT) Series, but is also available on our existing range of Airtight IC Boxes upon request; w/ground wire, gaskets and extension capability.
Divider plate, large, fits into large Junction Box 1062, Galv.
T-Grid Plate, 12-1/8” long x custom width. Note: Replace X with width required; e.g. 1405-2
T-Grid Plate, flat ends, 12-1/8” long x custom width.
Note: Replace X with width required; e.g. 1405-2-FE
Cover, wireway channel, for MR16 for 1224 Junction Box, Galv
Cover, wireway channel, for MR16 for 1224 Junction Box, Galv.